Today we’re going to root the Samsung Galaxy Core Prime SM-G360F which has recently received Android 5.0.2 update. As like always we’ll be using the CF-Root method to root the Galaxy Core Prime SM-G360F which is considered the best method to gain root access on Galaxy devices. So follow the below step by step to get your device rooted.

Carefully read and follow the rooting instructions before you start rooting your phone. You should know rooting voids device warranty, Therefore proceed at your own risk and do not skip any step as stated in the tutorial. We AndroidCentral.US and Chainfire shall not be responsible if in case you damaged your device. The procedure for rooting galaxy Core Prime has been tested and is confirmed to be working.


Requirements and Prerequisites:

  1. Backup all your important data as a precaution.
  2. Download CF-Root zip package for Galaxy Core Prime SM-G360F.
  3. Download Odin3 for Windows and jOdin3 for Mac.
  4. Ensure that you’ve installed Samsung USB Drivers on your PC.
  5. Enable USB Debugging by going to Settings>Developers Options and Enable USB debugging.
  6. Your device must charged, At least 50% is recommended.

Root Galaxy Core Prime SM-G360F Running Android 5.0.2

Step 1: First of all extract the CF-Root package that you’ve downloaded earlier.

Step 2: Turn off your phone and Reboot it into Download Mode, Press and hold down the Volume Down+Home+Power buttons simultaneously till you see a warning on your screen. Further hit the Volume Up button to continue.

Step 3: Run Odin3 from the unzipped folder.

Step 4: While in download mode connect your Galaxy Core Prime SM-G360F to PC via the USB cable. At this stage, make sure that Odin has recognized your device. If not reinstall the drivers and try again. Once detected, you’ll notice the Added!! in the message section.

Step 5: Only check Auto Reboot and F. Reset Time options and rest leave the default settings in Odin.

Step 6: At last you’re one step away to root your phone. Click the PDA button and select the CF-Rooted kernel tar.md5 file from the folder you’ve earlier unzipped. Further hit the START button to flash the CF-Root on Galaxy Core Prime SM-G360F.

Step 7: Wait for Odin to complete the flashing process, once it is done, it will notify you via the PASS!! message in Odin screen and at this point your phone will reboot automatically.

Step 8: When your phone boots normally, Open the app drawer and see that SuperSU has been installed. To verify root access, Open Google Play Store app on your phone and install “Root Checker“. Once installed run to make sure your phone is rooted.

Congratulations!! You’ve now successfully Rooted Samsung Galaxy Core Prime SM-G360F. You’ve now full root access, you can install apps from Google Play Store which requires root access, flash custom recovery and you can also try Custom ROMs and Mods.

Thank You ChainfireXDA for making it possible.

Do not forget to share your experience in the comment section and feel free to ask if you do need further support. For Android Tips and Tutorials keep visiting.

You may also like to read:

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.